LEDI GARRISON DESCRIPTION
Clean Water Output |
Salt Water |
Up to 1000 Litres per Hour |
Raw / Fresh Water |
Up to 1800 Litres per Hour |
|
Dissolved Solids in Purified Water |
< 1000 mg/L |
|
Turbidity |
< 0.3 NTU |
|
Input Conditions |
Inlet water TDS |
Up to 40,000 mg/L TDS (Sea Water) |
Inlet Water Conditions |
Fresh or Salt water from a moving water source. No visible Algae, sewage, waste water, oil or other visible contaminates. Water should appear clear and clean. |
|
Input Power |
230V 32A AC from Generator, Battery Inverter or Mains power |
|
Pre Filtration |
Three Stage Cartridge Filter 4x20" Size |
1. 20 Micron Pleated 2. 5 Micron Sediment 3. 5 Micron Carbon |
Reverse Osmosis |
Industrial Grade Reverse Osmosis |
Vontron or Dupont SW4040LE Membranes. Up to 5 elements in series and pressurised at up to 1200 PSI. Up to 1000Litres per hour from Sea water. For extended Longevity should be run at 700 PSI. Must be flushed at least one every 2 weeks after use to stay in service. |
UV Sterilisation |
NSF 55 Class A UV Sterilisation |
Built in UV Sterilisation. NSF 55 Class A compliant system. Installed at final point before water exits the unit. Integrated solenoid valve shuts off flow if UVT falls below suitable value. Lifespan up to 12months before lamp should be changed. |
Sensors |
Quality Sensors |
- Temperature compensating TDS sensors: Measure Inlet and Product water Total Dissolved Solids |
Flow sensor |
Product water flow sensor. |
|
Automation |
Automatic Control System with built in PLC and HMI |
Control: Startup, Shut down, Cleaning cycle, Flow direction, water quality sensing, filter change timers, Pressure sensing |
High Pressure Pump |
Axial Plunger Pump |
1000PSI Duplex Stainless Steel Axial Pressure Pump. Estimated 8000hr service interval. Must be used with 5 micron sediment filter installed. Pump paired with BLDC 10KW motor and controller. |
Supply Pump |
Self Priming Supply Pump |
Stainless Steel 50LPM Supply pump. |
Frame |
Welded Aluminium frame |
Aluminium welded frame, powder coated. |
Body Work Panels |
Aluminium body work |
Powder coated Aluminium body work. Light weight, corrosion resistant. |
Dimensions |
1330 x 885 x 1050mm |
|
weight |
Less than 450Kg |
|